S.King Fulton Slim Line Pedestal
6″ x 6″ x 36″ – 1/8″ Wall thickness
Due to shipping variations, this item is not available online
Call or email to order
S.King Fulton Pedestals are “ala carte”. Price show is for the housing, to that you add your options.
Configure from the options below, then call or email with your desired configuration for pricing.
The Slim Line pedestal can hold up to 4 outlets in combinations of 20A GFI / 30A twist lock / 50A 125/250V twist lock.
Each can be configured with the following options, call for a quote:
Receptacles and Circuit Breakers
All S. King Fulton Power Centers use Hubble Marine grade receptacles and are available in:
- 20A Duplex straight-blade GFI
- 0A, 30A and 50A/125V Twist Lock
- 50A/125/250V Twist Lock
- Each receptacle is protected by a SQ-D circuit breaker located on the front of the unit under one powder coated aluminum cover. Lockable covers are available
Receptacle Covers
All receptacles are covered for protection when not in use (receptacles are designed to be water-tight when in use). There are two different types of covers:
- Type “A” – Powder coated aluminum covers that allow the receptacles to be mounted at a 45° down angle (not available on the Piling Mount pedestals).
- Type “T” – Thermo plastic covers where the receptacles are mounted flush with the casing. Manufactured by Hubbell.
Electrical Meters
Available on all power centers and have the ability of metering up to six receptacles individually.
Telephone
Each power center is available with up to four telephone jacks or RJ45 data jacks.
Cable TV
Each power center is available with up to four cable TV jacks.
Lighting
Each power center is available with fluorescent or LED lighting. The light can be wired to an installed photocell or to a separate circuit to allow manual operation. Available with white or amber lens and with or without angled louver to direct lighting downward. Light illuminates three sides.
Hose Bibs
The Standard and Slim-Line models are available with up to two hose bibs using standard 3/4″ connections or optional lockable ball valves. The standard hose bib is a 1/4 turn Sillcock.
Water Meters
Up to two internally mounted water meters are available on Standard and Double (not shown) models only.
Hose/Cable Holders
The Standard and Slim Line models are available with up to two hose/cable holders.
Power Distribution Blocks
Each power center comes pre-wired with a power distribution block and is available in direct (home run) or loop (series) feed.
Fully Listed
Meets or exceeds all requirements for UL 231, NFPA 303 and NFPA 70 National Electrical Code Article 555.
Installation
The Standard and Slim Line power centers are designed to be mounted directly to the deck or the dock. A 11/8″ gasket for the bottom of the pedestal is supplied. Base templates are available. The Pile Mount unit is designed for mounting on a bulkhead or a pile (specify flat or round brackets).
****Pedestals are built to order, not stocked. Average order-to-ship time is 2-4 weeks. Call for current wait times if this is going to be an issue. Other configurations available, call for a quote.****
